Full Spectrum CBD Concentrate


This CO2 Full Spectrum Concentrate allows you to get high levels of full spectrum CBD into your formulations without a diluted oil taking up a large portion of your formula.  

This CO2 Full Spectrum Concentrate contains all the cannabinoids, terpenes, plant material, and chlorophyll that was in the hemp plant. Full spectrum can be produced through CO2 extraction or solvent extraction to produce a distillate. This distillate requires further processing to fall below the 0.3% THC level, which makes it inaccessible without a hemp processing license in some states. This leaves Makers with access only to the diluted full spectrum oil. 

Federally compliant for shipping and manufacturing. Food grade. 

This CO2 Full Spectrum Concentrate is 3000 mg per 30 mL, which means that each gram contains 100 mg of full spectrum CBD. 

Contains less than 0.3% Delta-9 THC

GMP compliant

- +
SKU: OEL-FSC Categories: ,

Full Spectrum CBD Concentrate


Fractionated Coconut Oil (Caprylic/capric triglyceride) and Full Spectrum CBD (Cannabidiol from Cannabis Sativa).

Extraction Method: CO2

Hemp is grown on southern farms that have been free of herbicides, pesticides, and fungicides for over a decade.

Gently Warm and Shake Before Use.

Packaging Directions:

CBD is sensitive to light and air. Your packaging choices should ensure that any CBD product is not exposed to light and air such as amber, green, blue, and UV coated packaging for light and well sealed packaging.

Filling Directions:

Always clean and sanitize your utensils with hot soapy water and rinse well. You can wipe excess water off or allow it to fully air dry. When you are ready to use any utensils for filling make sure to, spray them with 70% alcohol and wipe off with lint-free paper rolls. Don’t forget to clean and sanitize your working area as well. We recommend having written SOPs (Standard Operating Procedures) that include cleaning, sanitizing, as well as the use of hairnets, gloves, and lab coats or aprons when handling products.

There are a few methods that are effective to fill your product without the use of a filling machine.

  • Pour from a beaker or Pyrex container.
  • Use a sanitized reusable condiment container. Simply snip the tip of the container to work best with the viscosity of each product.

CBD content in a finished product is expressed in milligrams per milliliter in pourable products and milligrams per milligram in solid products. To determine the CBD content of your finished product divide the milligram content of the bulk base by the number of containers you fill it into. For example if you purchased a bulk base that has 1000 mg of CBD and filled it into ten 120 mL containers each of your finished products would contain 100 mg of CBD. On your label you would write 100 mg/120 mL.

CBD Calculator

If you are using the CBD Calculator below the CBD percentage to fill into the first space is 10.1%.

Note: The COA in the Third Party Test Results tab gives the exact measurements of 101.01 mg/g, 10.101% which means we rounded down slightly. The COA results are 3030.3 mg per 30 mL for exact measurements.

CBD Calculator
Total Grams of CBD needed to complete the number of products in the batch. New batch size will require new calculations
Reset Calculator

Weight N/A
Dimensions N/A

1oz, 4oz

Start typing and press Enter to search

Shopping Cart

No products in the cart.


Your Cart

Skip to content